CERT NETWORKS

Electromagnetic Lock Accessories

Electromagnetic Lock Accessories

 

 

Elock- 600 Series

Elock-600

 

pdf1

Elock-600L (Monitored) , Elock-600 (Unmonitored)
  • Electromagnetic lock is capable of holding doors weighing up to 600lbs. The lock is equipped with indication device to monitor the status of the premises, whether it is open or close.
  • Holding Force: 600lbs
  • Operating Voltage: 12V/24V
  • Current Consumption: 500mA/250mA
  • Lock Type: Fail-safe type
  • Dimension: 250mm x 41mm x 26mm
  • LED, magnetic bond sensor
  • N.O., N.C. relay
 

Elock- 600A Series /AL series

Elock-600

 

pdf1

Elock-600A (Unmonitored), Elock-600AL (Monitored)
  • The Elock-600A is capable of holding doors weighing up to 600lbs. Reinforced with ABS plastic bracket as add-on protection for the lock.
  • Elock-600AL is capable of holding doors weighing up to 600lbs. The lock is reinforced with ABS plastic bracket as add-on protection; it also comes with indication device to monitor the status of the premises, whether it is opened or closed. LED, magnetic bond sensor, N.O., N.C. relay
  • Holding Force: 600lbs
  • Operating Voltage: 12V/24V
  • Current Consumption: 500mA/250mA
  • Lock Type: Fail-safe type
  • Dimension: 250mm x 41mm x 26mm
  • Re-enforced ABS plastic bracket
 

Elock- 1200 series

 

Elock-1200

 

 

pdf1

Elock-1200L (Monitored), Elock-1200 (Unmonitored)

  • Elock-1200L is capable of holding heavy doors that weigh up to 1200lbs. Equipped with door monitoring sensor and indication device, LED, magnetic bond sensor, N.O., N.C. relay
  • Elock-1200 is designed to hold heavy doors that weigh up to 1200lbs
  • Holding Force: 1200lbs
  • Operating Voltage: 12V/24V
  • Current Consumption: 500mA/250mA
  • Lock Type: Fail-safe type
  • Dimension: 265mm x 66mm x 40mm
 

Elock-300

 

 

 

pdf1

DESCRIPTION

300lbs EM Lock (Unmonitored)
  • Elock-300 is designed for light doors, capable of holding doors weighing up to 300lbs.
  • Holding Force: 300lbs
  • Operating Voltage: 12V/24V
  • Current Consumption: 300mA/165mA
  • Lock Type: Fail-safe type
  • Dimension: 170mm x 40mm x 22mm
 

Elock-600×2 Series

 

 

 

pdf1

DESCRIPTION

Elock-600Lx2 (Monitored), Elock-600×2 (Unmonitored)
  • Elock-600Lx2  is designed for dual leaf door type. Equipped with door monitoring function and is capable of holding doors weighing up to 600lbs on each leafs,  LED, magnetic bond sensor, N.O., N.C relay
  • Elock-600×2 is specially designed for dual leaf doors. Capable of holding doors up to 600lbs on each leafs.
  • Holding Force: 2 x 600lbs
  • Operating Voltage: Dual voltage 12V/24V DC
  • Current Consumption: 2 x (500mA/250mA)
  • Lock Type: Fail-safe type
  • Dimension: 250mm x 41mm x 26mm
  • MOV surge protection
  • Push-off button
 

Elock-800S

 

 

 

pdf1

DESCRIPTION

  • Elock-800S is designed with stainless steel housing. Capable of holding doors that weigh up to 800lbs.
  • Holding Force: 800lbs
  • Operating Voltage: 12V/24V
  • Current Consumption: 500mA/250mA
  • Lock Type: Fail-safe type
  • Dimension: 220mm x 46mm x 29mm
  • Stainless steel housing
  • Fully sealed electronics
 

Elock-S230M/MF

 

 

 

pdf1

DESCRIPTION

Elock-S230M (Fail Secure), Elock-S230MF (Fail Safe)
  • Elock-S230M is a strike lock system with door status monitoring function. It is a fail-secure lock type therefore it will not release the lock even during power failure.
  • Elock-S230MF is a strike lock system with door status monitoring function. It is a fail-safe lock type therefore it will release the lock during emergency power breakdown.
  • Operating Voltage: 12VDC
  • Operating Current: 190mA
  • Door status signal feedback (monitored)
  • Dimension: 124mm x 32mm x 38mm
 

Elock-B100

 

 

 

pdf1

DESCRIPTION

 

Elock-B100 bolt action lock offers wide range of installation application, suitable for wood, aluminium and steel doors. Works with sliding, single-action and double action doors and gates.
  • Operating Voltage: 12V
  • Operating Current: 900mA
  • Holding Current: 350mA
  • Lock Type: Fail-safe type
  • Operation Delay Time: 0sec, 2.5sec, 5sec, 9sec
  • Door Sensor (N.C. & N.O.)
  • Built-in Delayed Egress, Control Point
  • Dimension:
   Face Plate: 200mm x 32mm x 40mm
   Strike Plate: 90mm x 26mm x 2mm
   Bolt Stainless Steel: 15.5 Diameter, 16mm throw
 
 

Elock-S210M/MF

 

 

 

pdf1

DESCRIPTION

Strike lock S210M (Fail Secure), Strike lock S210MF (Fail Safe) 
  • Elock-S210M is a narrow style strike lock system with door status monitoring function. It is a fail-secure lock type therefore it will not release the lock even during emergency power breakdown.
  • Elock-S210MF is a narrow style strike lock system with door status monitoring function. It is a fail-safe lock type therefore it will release the lock during power failure.
  • Operating Voltage: 12VDC
  • Power Consumption: 2.3 Watt max
  • Operating Current: 190mA
  • Monitored, narrow style
  • Door status signal feedback (monitored)
  • Face Plate: Stainless Steel
  • Dimension: 160mm x 24mm x 31mm
 

EL-BKG201

 

 

 

pdf1

DESCRIPTION

EL-BK-G201 – Glass Holder used with EL-BK-G200 glass door housing and Elock-B100 bolt action lock. Suitable for glass with thickness of 9mm~12mm.
  • Used with Elock-B100 Bolt Action Lock with EL-BK-G200 glass holder
  • Suitable for glass (thickness of 9mm~12mm)
  • Stainless steel built for durability
  • Rubber plate and steel plate for strong holding
 
 

EL-BKG200

 

 

 

pdf1

Office Address

Stay Connected

Stay With us

Subscribe and get lastest updates from Us.

CERT NETWORKS